Chemical concentrate or ready to use solution | |
Compressed Air | up to 4 CFM |
Electric | 120V |
Requirements
Chemical concentrate or ready to use solution | |
Compressed Air | up to 4 CFM |
Electric | 120V |
Overview
Safety & Operational Precautions
To Install (refer to diagram on next page)
To Operate
TIMER ADJUSTMENT
TO OPERATE
Troubleshooting Guide |
---|
Problem | Possible Cause / Solution | |
---|---|---|
Startup | Maintenance | |
A) Air pump will not run or pump solution. B) Will not draw chemical. C) Pump runs too fast with no output. D) Unit doesn't come on when switch is turned on. E) Unit comes on and runs continuously. F) Unit comes on but no solution through solenoid. | 1,2,3 1,2,3 2 4,5 4 4 |
6,7,10,11 7,8,9 8,9,10,11 |
Possible Cause / Solution | |
---|---|
Startup | Maintenance |
|
|
PREVENTIVE MAINTENANCE: When the unit will be out of service for extended periods, place chemical tube(s) in water and flush the chemical out of the unit to help prevent chemical from drying out and causing build-up. Periodically check and clean chemical strainer and replace if missing. |